[willie turbo]

I am trying to locate a throttle body spacer plate, for my L67, that also has a nitrous injection port... I have seen them at various sites, but can not now find the site, to save my life. Please respond, if anyone has info on this!!

Thanks a bunch

 

[Merc]

http://www.thrashercharged.com/l67_htm/nos.shtm

 

[GR8racingfool]

I bought this one:

http://www.pfyc.com/store/merchant....WB3017&Product_Count=27&Category_Code=GPUNDER

Drilled and tapped a hole in the back side for the jet, aimed the jet to flow IN with the rest of the air into the supercharger worked great. No problems...no leaks...and no blow engine. Of corse I was only running a 50 to no more than a 75 dry shot of Nitrous.

Hope that helps you as well.

~Farnsworth~

 

[sr71rgl]

Does anyone know where to find a phenolic spacer for an LS1 TB w/out having to buy a whole kit?

 

[Merc]

Email ZZP. I think they will sell it by itself

 

[12secondv6]

My set up
Old TB drilled n tapped:
http://bbbracing.com/12secondv6/100_0394.JPG
and
http://bbbracing.com/12secondv6/100_0393.JPG

This was in a mildly ported TB

Now, below is an unported TB but the nitrous nozzles have been relocated

http://bbbracing.com/12secondv6/100_0403.JPG
and
http://bbbracing.com/12secondv6/100_0405.JPG

The old set up had the nitrous hit the TB blade.

The new set up does not.

 

[camlifter]

I am trying to locate a throttle body spacer plate, for my L67, that also has a nitrous injection port... I have seen them at various sites, but can not now find the site, to save my life. Please respond, if anyone has info on this!!

Thanks a bunch

i use the thrasher plate also, comes taped for the nozzle