3800Pro Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
We have recently updated our pricing structure and given the pro tuner to all of our existing customers at no charge. Included in our announcement was a competative trade-in upgrade plan. Trade in a competitors product for a discount toward the purchase of our advanced units.

If you have any questions regarding the trade-in plan, please feel free to ask or e-mail me.

One thing you boosted V6 racers may like is the Enhnaced IO interface we offer. Not only can you connect wide band O2 sesnsors, 3 bar MAP sensors, fuel pressure signals, etc. etc.. but you can also command outputs with the scanner.

For example, with 1 output you could command to turn on when KR > 2deg. You could have a red light on your dash in line with the track to show you when you are receiving KR and to let off. You could also have a green light that will turn on when your air fuel ratio from a wide band is greater than 11.0 and less than 12.0, or a more lean mixture for an NA car. If you see the green light go off, then you know your accurate wide band O2 sensor is reporting an unsafe condition and that you should abort the pass and review the log. There would be no need to constantly glance over at your laptop to see if your parameters are ok, or at gauges on a pillar.. no need to listen for soft "beeps" over loud exhaust frequently found on race cars.. Again, any questions please feel free to ask.

Trade-in Program
We offer the following trade-in's credits towards any purchase.

Carputing: $200 (making $299 to purchase STD interface or $449 for EIO)
EFI Live: $250 (making $249 to purchase STD interface or $349 for EIO)
Carputing + EFI Live: $350 (making $149 to purchase STD interface or $299 for EIO)
Autotap: $100 (making $399 to purchase STD interface or $549 for EIO)
Hypertech/Predator: $50 (making $449 to purchase STD interface or $599 for EIO)
DHP: $350 (costs $149 to purchase STD interface or $249 for EIO)

All credits will be given once hardware cable/dongle/wart is returned to HPTuners. Granting of credits is at the sole discretion of HPTuners once the trade-in product has been received. Please contact [email protected] for all trade-in details. Please bear with us while we gear up for this it may take a week or so before the full details of where to send stuff etc. is available.

- Keith, HP Tuners
 

·
Registered
Joined
·
168 Posts
So if I trade you my DHP PCM you are gonna gimme 350??
 
1 - 5 of 5 Posts
Top