3800Pro Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
I have a 1993 Olds Silhouette with the 3800. we've replaced the crank sensor, the cam sensor, and had the ignition control module checked and it still won't run. we've put a diagnostic code scanner on it and it shows nothing. The coils don't have any spark so I don't have any idea what it could be.
 

·
Registered
Joined
·
1,677 Posts
Try using some connector grease on the connector going into the bottom of the ignition module, this fixed a lot of problems for me anyways, also go through ALL the fuses on the car, make sure they are not blown for 1 and clean off ALL the corrosion from the plugs, this will prevent you from breaking down alongside the road somewhere, like me i just broke down in the WAL-MART parking lot lol.
 

·
Registered
Joined
·
77 Posts
Such an old post but I bet the ground that attaches to the bracket stud was not grounding or not connected at all.
 
1 - 5 of 5 Posts
Top