3800Pro Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Can anyone tell me how many bell housing bolts are in the 3800 series 2 trans i got the bolt out thats hid under the rear manifold and torque converter bolts and trans still wont seperate from the engine what am i missing
 

·
Super Moderator
Joined
·
275 Posts
5... There should be 4 facing the same way, including the one with a stud for grounds, and the one you mentioned facing opposite direction in the back.

You'll have to pry the engine/trans apart ~1/2" to separate the 2 guide pins in the block, and keep then slightly apart to clear the torque converter center post. It's a balancing act while you get the motor mount to release under the passenger side.
 
1 - 2 of 2 Posts
Top