3800Pro Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter · #1 · (Edited)
I am about to do some tuning on my 1993 ssei
I have:
Lucas 42.5 flow matched injectors
Mini Afc 2.0
autolight 3 stages colder plugs
full three inch exhaust, no cat
2.3 pulley on freshly rebuilt supercharger
8.0 plug wires
ca intake w/ valve cover breather
new radiator w/ drilled 160 therm
very soon to come jet stage 2 chip (if it matters)

I guess that standard mode is fine since these arn't massive mods.

If anyone has a simmilar setup or is experienced in tuning these. what would be a close setting?

Im not to bright on electronic moding so any help is appreciated.

Thanks in advance,
Jake
 

·
Registered
Joined
·
7 Posts
Discussion Starter · #3 ·
Sorry 2.3" pulley.. but that shouldnt matter that much..

1993 = OBDI;
So I cant use an autotap...

Looking for more mini afc tuning advice than anything,
thanks for the response
 

·
Registered
Joined
·
72 Posts
Cant see how I missed that...Anyway what methods of scanning are you using now?

This is thin but..At the very least..Your PCM still should toss a code if its rich or lean to keep you safe.

Sorry for the brainfart...
 
1 - 4 of 4 Posts
Top