3800Pro Forums banner

Low brake fluid

1024 Views 2 Replies 3 Participants Last post by  spd98
Today was the first time I really pushed my new Stage 3 setup hard, and when I floored it, and it down shifted, The front end came up quite a bit, and the DIC flashed Low brake fluid. As soon as I let off the gas, it went right away. I checked the fluid, and it is full. With the Stage 3 motor, is it possiple to produce enough G's to to cause the fluid to roll back enough in the resovir to cause it to think it's low?
1 - 3 of 3 Posts
Possibly. So when the car is level, the fluild level is at the full mark? Or in between the low and full?
Check and make sure the sensor is connected all the way. Mine got unplugged last time I had the motor out and did the same. When I floored it I guess it would loose connection.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top