3800Pro Forums banner
1 - 3 of 3 Posts

·
Super Moderator
Joined
·
885 Posts
Ya, if you rebuild the rotating assembly as a SC setup, the block won't know the difference. Just need to be able to have the balance done right.
 

·
Registered
Joined
·
46 Posts
The blocks are the same between both motors, however just keep in mind the L67 pistons & rods will give you slightly lower compression than the L36 ones. It won't matter so much if your planning a boosted build
 
1 - 3 of 3 Posts
Top