16 GALLON FUEL CELL SYSTEM SYSTEM FOR SALE (ALL ITEMS INCLUDED ARE BELOW). Any reasonable offer will be considered and trades are also welcome.
Items that I will consider for trades and/or trades plus cash:
-L67 or L32 low mileage engine complete from blower to pan
-Intense 1.9 ratio gen 3 roller rockers
-titanium retainers
-m90 modular pulley 8 rib system
-Intercooler for a m90
-WPI IC m90 or gen 5 m90 with matching lower intake
Here is what I have for sale:
16 gallon jaz pro street fuel cell with 0-90 ohm fuel sending unit
jaz fuel cell mounting rails
aeromotive a1000 fuel pump
aeromotive a1000 -6 fuel regualator
aeromotive 100 micron and 10 micron fuel filters for prefilter and afterfilter
aeromotive adjustable fuel pump controller
rollover valve
all aeroquip braided stainless -10an and -6an line needed to make runs for main feed, return line and evap
all aeroquip and aeromotive fittings needed to complete the fuel cell system
proform -10AN wrench (for making fitting connections)
proform -6AN wrench (for making fitting connections)
aeroquip vice clamps (for making fitting connections)
autometer phantom 0-90ohm fuel gauge
This incudes everything you need besides fuel rails (which you can get from PRJ) to make a complete high hp fuel injected fuel cell system for your car. These are all new parts and have never been used, I have over $2000 into the system. It is designed to have a -10an main feed and to split off to 2 -6an lines to hit the rails, has provisions for a -6an return line and a -6an evap (vented into the air outside of the car).
Asking price is $1700 obo
Items that I will consider for trades and/or trades plus cash:
-L67 or L32 low mileage engine complete from blower to pan
-Intense 1.9 ratio gen 3 roller rockers
-titanium retainers
-m90 modular pulley 8 rib system
-Intercooler for a m90
-WPI IC m90 or gen 5 m90 with matching lower intake
Here is what I have for sale:
16 gallon jaz pro street fuel cell with 0-90 ohm fuel sending unit
jaz fuel cell mounting rails
aeromotive a1000 fuel pump
aeromotive a1000 -6 fuel regualator
aeromotive 100 micron and 10 micron fuel filters for prefilter and afterfilter
aeromotive adjustable fuel pump controller
rollover valve
all aeroquip braided stainless -10an and -6an line needed to make runs for main feed, return line and evap
all aeroquip and aeromotive fittings needed to complete the fuel cell system
proform -10AN wrench (for making fitting connections)
proform -6AN wrench (for making fitting connections)
aeroquip vice clamps (for making fitting connections)
autometer phantom 0-90ohm fuel gauge
This incudes everything you need besides fuel rails (which you can get from PRJ) to make a complete high hp fuel injected fuel cell system for your car. These are all new parts and have never been used, I have over $2000 into the system. It is designed to have a -10an main feed and to split off to 2 -6an lines to hit the rails, has provisions for a -6an return line and a -6an evap (vented into the air outside of the car).
Asking price is $1700 obo