3800Pro Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hey guys, first post here. I have a 95 riviera N/A. I’ve had it for a while now and it has had just about every issue it could of.. anyways I put a used engine in a few years ago, I put about 60k on the newer engine. I know have a knocking noise coming from somewhere, at first I thought it was the harmonic balancer. I took the drive belt off and the noise is still there. My original engine spun a bearing. I am hoping this one didn’t do the same.

the noise is consistent with rpm. which was different for the spun bearing motor, the original had more of an irregular knock. I will post a video of the noise here..
Excuse the squeaky belt, she doesn’t get out much these days.


any thoughts to what that could be? I haven’t taken the oil pan down yet to check the bearings but will eventually.
Thank you 🍻
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #2 ·
I got under the riv today pin pointed the noise to the flywheel, I had one bolt loose. Tightened all of them up and put lock tight on and now she’s good as new 🤯
 
1 - 3 of 3 Posts
Top