3800Pro Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
39 Posts
Discussion Starter · #1 ·
What is the procedure for changing out the dash speedo, tach, etc. background? I have a white inlay or whatever you call it, but no instructions so I don't know how to wire it or install.
I would appreciate help or a link to a site that might be able to help,TIA :)
 

·
Registered
Joined
·
38 Posts
disconnect battery
remove dash cover
remove bolts holding guage cluster
pull forward, remove clips holding wiring harness
remove harness
take out cluster
remove plexiglass cover
note location of needles ***** (they will have to be set in the same position)
carefully pry up needles
place inlay
replace needles,cover
run ground to body and hot to light switch ( i think purple wire)

i hope this helps !!!!

Kip
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top