3800Pro Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Good evening all. I'm looking to see if you guys have any answers or solutions to my problem and hopefully i posted this in the correct forum section. I have an 04 impala ss (68xxx miles) with an intake, and 3.4 pulley. I just installed some autolige 104's, 3" zzp downpipe, and mail tuned pcm. After going through the pcm security learn the car had the parking brake, traction off, and abs light illuminated on the dash. The traction control would not change whatsoever when i hit the button either. These lights were not lit up prior to the pcm install, and i didn't bump or knock anything when installing the other parts. The mail tune was just a standard aftermarket tune, and nothing crazy was put in regarding the tables or anything.

The car was then scanned with an OTC Genesys and codes v1000 and v1040 came up. I have been searching for quite awhile and am hoping the wealth of knowledge that you guys have here can help me, thank you.
 
1 - 2 of 2 Posts
Top