3800Pro Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
13 Posts
Discussion Starter · #1 ·
I have the opportunity to pick up a 60-1 for next to nothing. It has an A/R of .63. From what i've seen using the compressor maps on here Turbo fast and the flow values from turboflow . It looks as if it would be fairly efficient for medium boost (10 to 20 lbs at 6k). Anyone one know what kind of spool characteristics this would give or if it would be a good match?
 

·
Registered
Joined
·
59 Posts
It would be a quick spool, and the compressor is perfect for a mildy modded engine. I ran 12.0 with the 60-1 and Turbo Tim ran mid 11's, both with the .69 A/R.
 

·
Registered
Joined
·
4 Posts
well, I know on my srt-4 I am getting a 50 trim cuz I only have 6000rpm's to use, but the 60-1 is good for up to about 550-600whp on a good tune and supporting mods. Full boost on24psi (every car differs) is around the 34-3600 range (once again your ar will differ a lot form mine). Being that you have 1.4 liters more than me...it'll spool even quicker than 3500rpm...
 
1 - 3 of 3 Posts
Top