3800Pro Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hey guys I just picked up a 04 gtp with the paddle shift etc..I’m told I can’t use this trans in my 05 with swapping bcm and column and everything..is it possible to swap it and just tune it out? Thanks
 

·
Super Moderator
Joined
·
274 Posts
I haven't tried converting any cars to TapShift from a CompG or GXP, yet. It's a little more fun to use in my GXP than the console shifter in the other models, so I understand why you'd want to try it.

The good news is that there were 2005 CompG models before the GXP's replaced them at the end of 2005. You could try getting the PCM tuned as a 2005 CompG and work towards adding whatever items, BCM, TCM etc. that may also have to come from a TapShift version (possibly from the same year, not sure if that's necessary or not).

Might want to contact ZZPerformance or DynoBryan to see if they can answer it quicker, especially if you're going to wind up getting it reprogrammed by someone like them.

- Dave
 
1 - 2 of 2 Posts
Top