3800Pro Forums banner
m90
1-6 of 6 Results
  1. Wanted
    I'm putting a gen 3 m90 blower on my NA 3800 and there are still a few parts that i need including the ignition coil bracket that has the pulleys for the supercharger and a fuel rail that will go overtop of the blower but also have the injectors going into the LIM . I've seen them both on...
  2. Superchargers
    I recently picked up m90 supercharger and LIM out of a 02 grand prix that i'm trying to figure out how to put onto my 96 regal which has the l36 motor. I know that i'm going to need ignition coil bracket bigger injectors fuel rail and FPR line brake booster line vac lines spark plugs snout with...
  3. Superchargers
    Does anyone have a good write up on how to take off the supercharger? I purchased a port and polished one and need to put it on. Just a kid lookin for some help. Thanks guys
  4. For Sale
    Sorry Its gone
  5. For Sale
    L67 Parts Got an L67 from a '97 GTP. Have a pair of heads; They have the stock springs and valves, no rockers -$50+shipping, Eaton M90 Supercharger; no pulley, has 143,xxx miles on it, has not been rebuilt or had fluids changed -$75+shipping, Have the stock block as well -make offer will...
  6. Superchargers
    As I am doing my lower intake and valve cover gaskets right now, I was having boost issues before with only getting around 4-5 psi at WOT. I have checked for belt slip, BBV seems to work but actuator move half way not touching housing, checked all the vacuum lines no cracks, not sure about if...
1-6 of 6 Results
Top