Eaton TVS 1900 Blower now an option for the 3.8L

firemangtp · #1 (**permalink**) 10-31-2008, 02:48 PM

Hey guys,
*disclaimer* Im not the guys selling these, nor am I affiliated with them.... just want to let everyone know its a new option for 3800 power adders****

I just wanted to kind of spread the word that the new Eatons are looking like they can be made to fit our 3800's!

Should be badass, they said the HTV1900 is capable of 700HP easily and flows nearly DOUBLE that of a Gen5 M90.

I know there was a thread like this on the other US GP forum and basicly Zoomer was in talks with the guys at Harrop Performance to make an actual case to fit our intakes.

That fell through, but I contacted the guys at the company and they said they CAN and WILL make an adapter plate for us. As of now, no one sells this... , but basicly all we need to do is tell them to make it.

They already have computer generated pics of TB and intake adapteres, as well as plans to make a working PCV etc. (no EGR or coolant through it though) They started it for the Holdens and I guess never finished it.

I dont know if Im allowed to say specific pricing, but its just into the 2k range for the 1900 unit and adapters plus shipping, discounts if there are 5 buying at one time.

I dont want to give anything more specific than that becuas they arent vendors here. (Mods, if you want, give me the info they need and maybe I can get them to be)

Thats about it.

Just wanted to spread the word on a new SC for us!

04DetroitLS · #2 (**permalink**) 10-31-2008, 03:58 PM

Isn't the 1900 the one that comes on the Ford GT?

firemangtp · #3 (**permalink**) 10-31-2008, 05:01 PM

I dont know about Ford, but I believe this is the one that comes on the new SC ZR1 Vette.

If not the ZR1, then the maybe the '09 CTS-V

Either way, its a bad moffo.

1993 SLE · #4 (**permalink**) 10-31-2008, 07:39 PM

hrmmm i wonder if any of the rotors will fit into the Gen V casing like the pic?

chrisb · #5 (**permalink**) 10-31-2008, 10:16 PM

Quote:

Originally Posted by 1993 SLE

hrmmm i wonder if any of the rotors will fit into the Gen V casing like the pic?

man that would be sweet i would swap them out in a heartbeat!

04DetroitLS · #6 (**permalink**) 10-31-2008, 10:31 PM

ok who's emailing Eaton this weekend??
GP on Rotors?

PonchoDvr4Lfe · #7 (**permalink**) 10-31-2008, 10:50 PM

They are using this charger on both plus Roush is using it on their Mustangs. Good call.

firemangtp · #8 (**permalink**) 10-31-2008, 11:48 PM

I dont think the rotors are swapable since they are a 6 blade vs 3 blade (M90 case).... the case is probably different internally.

I attached a spec sheet the Harrop guys sent me, it has the specs of the 1900 case interior, maybe someone can find this for the M90 and check just to be sure.

Here's the flow #'s vs M90:

M90 (5th gen) 1135 m^3/hr

HTV1320 1420 m^3/hr

HTV1900 2000 m^3/hr

edit...
here's the Gen4 M90 according to MP
http://www.magnusonproducts.com/images/mp90draw.jpg

~Dan

newt · #9 (**permalink**) 11-03-2008, 12:56 AM

Quote:

Originally Posted by firemangtp

I dont know if Im allowed to say specific pricing, but its just into the 2k range for the 1900 unit and adapters plus shipping, discounts if there are 5 buying at one time.

If you're hinting that you need 4 other buyers, I'd be into that.
Let me know...