ALL PARTS CAN BE PICKED UP IN STERLING HEIGHT,MI 48314
ALL PRICES ARE SHIPPED TO DOOR
Ok so i am back again for round 2 of more an more an more parts. Everything goes as follows. All parts are OBO. Would like to see parts picked up but will ship no problem as long as shipped price is agreed on first. So lets not wait any more time an get right down to it.
EXTERIOR PARTS
GRILLE FX GPO GRILL INSERTS ( COMES WITH MESH GRILLS TOP AN BOTTOM, PAINTED TO MATCH LOWER PART OF BUMBER, PAINT IS PERFECT )-----$175
NEW PARTS
SNOW PERFORMANCE INJECTION KIT ( UNIVERSAL KIT / NEW IN BOX EVERYTHING U NEED)-----295
DEVILS OWN INJECTON ( L67 KIT / MOUNTED BUT NEVER USED )-----$275
ZZP S4 HEADS CASTINGS ( I DISASEMBLED THEM TO PUT SOILD VALVES IN NEVER FINSHED, COMES WITH 150# SPRING AN SEALS, LESS THAN 5K MILES )-----$800
ZZP S2 IC W/ PRECUT GARLOCK GASKETS-----$550
ZZP S3 RAD ( NEVER SEEN COOLANT )-----$180
ZZP GM IC PUMP W/POWER HARNESS-----$150( NEVER SEEN COOLANT )
ZZP LQ4 MAF WITH PIPTAIL WIRING L67 ( NEVER RUN )-----$80
ZZP AIR TO FUEL PIGTAIL-----$12
ZZP 3.0 PULLEY IN BLACK-----$40
ZZP STAGE ONE AXLE ( JUST PASSANGER SIDE ONLY )-----$75
ZZP CRADLE SPACERS-----$15
GM REVISED LOWER INTAKE GASKETS-----$50
ZZP LOWER INTAKE S2 IC REVISED-----$80
CASPER FUEL PUMP REWIRE-----$65
GATES 060680 BELT( 0 MILES )-----$20
LS1 TB GASKET (WILL ONLY SHIP WITH OTHER ORDER)-----$5
PYPES PERFORMANCE STAINLESS EXHAUST TIPS ( MODEL EVT56 3.0IN-3.5OUT )-----$45
UDWPP IN CLEAR ( HAVE ONLY 3 LEFT )-----$55 EACH
USED PARTS
DHP POWERTUNER ( USED MAYBE 5 TIMES )-----$310
ZZP 2.8 PULLEY IN CLEAR-----$37
ZZP 2.55 PULLEY IN CLEAR-----$37
ZZP CUSTOM 2.50 PULLEY IN CLEAR-----$50
THRASHER 2.76 PULLEY IN BLACK-----$42
STOCK HEADS COMPLETE ( 01 GTP 94K )-----$150
INTENSE PCM( 99 GTP BASIC FILE )-----$75
HUD AN SWITCH-----$70
ALPINE TYPE S 5.25 SPEAKER ( SPS-500 MODEL )-----$50
GEN 3 M90 SNOUTS ( ONE NEED TO BE REBUILT,ONE IS TURNED DOWN, 2 ARE STOCK, ALL GOOD BEARNINGS, )-----$60 EACH FOR GOOD, $20 FOR BAD
ITEMS SOLD
GTP DASH KIT
GAUGE BEZAL
NICE OE FOG LIGHT HOUSINGS
ZZP S1 TB
GM REVISED LOWER INTAKE GASKETS( 1 SET )
ZZP MPS HUB ( W/ BOLTS )
ZZP FUEL LOGS WITH REGUATOR/GAUGE AN MOUNTING HARDWARE
ZZP 3.4 PULLEY
1) UDWPP
ZZP 3.2 PULLEY IN BLACK
42# INJECTORS
ZZP VALVE COVER BREATHER
ONE USED GEN 3 SNOUT
GEN 1 AREOFORCE GAUGE ( WHITE AN BLACK BACK GROUND)
STRUT TOWER BRACE
ZZP PORTED REAR MANIFOILD AN COATED CROSSOVER PIPE
EVERYONE PLZ READ!!!!!!!!!!!!!!!!!!!!!!!!
NOW EVERYONE PLZ BARE WITH ME I AM GOING TO DO MY BEST TO ANSWER QUESTIONS AN SHIP THINGS OUT. THERE IS ALSO OTHER RANDOM PARTS THAT I HAVE THAT ARE PICTURED SO IF YOU SEE SOMTHING IN THE PICS U NEED THAT WAS NOT LISTED JUST ASK.
PRICES ARE PRETTY FRIM AS OF NOW BUT I AM WILLING TO WORK WITH ANYONE TO A DEGREE BUT JUST DONT WAIST MY TIME WITH UNREALIST OFFERS.
I WILL NOT SHIP ONE GASKET ALL BY ITSELF BUT WILL ADD TO AN ORDER.
ALL PICS CAN BE VIEWED AT
GTP Parts FS pictures by jlaudioeclipse - Photobucket
I AM ACCEPTING PAYPAL AN CASH. ALL MEMBERS USING PAYPAL MUST HAVE A CONFIRMED ADDRESS OR ITEMS WILL NOT SHIP. IF ITEM IS SOLD IT WILL BE POST UNDER SOLD ITEMS.
I AM NOT HOLDING PARTS FOR ANYONE. ALSO I DONT DO DIBS I DO CASH SO IF WANT AN ITEM THAT BAD SEND ME MONEY.
PAYPAL @
JLAUDIOECLIPSE@HOTMAIL.COM - DO NOT SEND FUNDS UNLESS WE HAVE SPOKE ABOUT IT BEFORE HAND.
THANKS EVERYONE ONCE AGIAN FOR LOOKING
Linear Mode
