|
Series II Block and Crank...
I have a supercharged block and crank I purchased and when I tore it down 2 of the cylinders had minor pitting from surface rust. My machinist said he could bore it a few thousands and use it, but no one makes pistons that small, so... Anyone interested in boring 10 or 20 over for Diamond or other pistons, this is a perfectly good block and crank.
Make an offer, I'm located in the Twin Cities, MN so I would imagine this should be pickup only.
Thanks!
MOBILE
__________________
Self Installed SC3800/5 speed. 19"s.. w/ 13" Brakes on all 4 corners.
Cause if your not breakin' stuff, it's not modded enough.
4 years in Avionics & 14 years in Car Electronics
Last edited by MOBILE; 11-17-2008 at 03:56 PM.
|
Linear Mode
