|
|
| Rear Wheel Drive Discussions regarding RWD setups. |
 |
|
09-05-2006, 08:53 PM
|
|
3800 Guru
|
|
jon lewis
2k2 camaro
Location: hell, tx
Join Date: Dec 2005
Posts: 568
Forum Experience
ezrollin holds the following arcade championships:
None.
|
|
|
It ONLY shifts DOWN!!!!
here are my test results:
With the engine off:
From Park I can move the shifter all the way to 1st and the gear selector lever on the tranny actually goes to 1st.
If the gear selector on the tranny is in 1st (and so is my shifter) I try to move it to park, the tranny will stay in 1st.
Is the shifter pushrod bent or something???
In a nutshell: It will only shift from Park -> Neutral -> OD -> 3 -> 2 -> 1st
but it wont do the opposite!
|
09-06-2006, 10:01 PM
|
 |
3800 Senior Member
|
|
Scott Wendt
01 Jeep Grand Cherokee 4.7
Location: MN
Join Date: Oct 2005
Posts: 240
Forum Experience
FreemenGMTech holds the following arcade championships:
None.
|
|
Quote:
Originally Posted by ezrollin
here are my test results:
With the engine off:
From Park I can move the shifter all the way to 1st and the gear selector lever on the tranny actually goes to 1st.
If the gear selector on the tranny is in 1st (and so is my shifter) I try to move it to park, the tranny will stay in 1st.
Is the shifter pushrod bent or something???
In a nutshell: It will only shift from Park -> Neutral -> OD -> 3 -> 2 -> 1st
but it wont do the opposite!
|
actually i think that there is something wrong in the manual valve bore of the valvebody or that you may have an issue with the shifter on the column [or s poor/siezed interlock cable.
checking information that i have on 4l80e guess it would also help if i knew what i was trying to diag.
__________________
----LEGAL SPEAK ----> this is just a theory and is no way intended for a fix, repair, tsb, factory authorized modiciation, or proceedural update! this is just some idiot talking out his butt. 
if it an't broke DONT replace it, or suffer issues later [your choice].
-Mr. Goodwrench
[signature broke - never said i is an english major nitpick all you wish]
|
09-06-2006, 10:04 PM
|
|
3800 Guru
|
|
jon lewis
2k2 camaro
Location: hell, tx
Join Date: Dec 2005
Posts: 568
Forum Experience
ezrollin holds the following arcade championships:
None.
|
|
|
its a 4L60e for the 2002 f-body
I can get under the car and shift it manually using the tranny gear selector(or whatever the tech name is).
|
09-06-2006, 10:06 PM
|
|
3800 Guru
|
|
jon lewis
2k2 camaro
Location: hell, tx
Join Date: Dec 2005
Posts: 568
Forum Experience
ezrollin holds the following arcade championships:
None.
|
|
|
manually i can get underneath and shift it up or down.
but using the shifter, I can only go down p -> R -> N -> OD -> D -> 2 -> 1
|
09-06-2006, 10:07 PM
|
|
3800 Senior Member
|
|
Scott Wendt
01 Jeep Grand Cherokee 4.7
Location: MN
Join Date: Oct 2005
Posts: 240
Forum Experience
FreemenGMTech holds the following arcade championships:
None.
|
|
Quote:
Originally Posted by ezrollin
manually i can get underneath and shift it up or down.
but using the shifter, I can only go down p -> R -> N -> OD -> D -> 2 -> 1
|
column shift or console shift? never mind
sounds like to me you have a problem with the shift interlock cable... it may be out of adjustment also...
the cable can be binding itself or you may be having an issue with the park lock brake solenoid [foot on brake to shift]
the fact that you can go under and manually shift it to park or anyother gear leads me to suspect that you have a problem with the cable binding... check for abnormal [high angle/sharp 180] bends... take the cable loose at the shifter and check to see if it moves freely when disconnected from the trans external mounting point... if the cable disconnected from both ends is free... then your problem is in the interlock soleniod.
__________________
----LEGAL SPEAK ----> this is just a theory and is no way intended for a fix, repair, tsb, factory authorized modiciation, or proceedural update! this is just some idiot talking out his butt.
if it an't broke DONT replace it, or suffer issues later [your choice].
-Mr. Goodwrench
[signature broke - never said i is an english major nitpick all you wish]
Last edited by FreemenGMTech; 09-06-2006 at 10:12 PM.
|
09-06-2006, 10:22 PM
|
|
3800 Guru
|
|
jon lewis
2k2 camaro
Location: hell, tx
Join Date: Dec 2005
Posts: 568
Forum Experience
ezrollin holds the following arcade championships:
None.
|
|
|
thats exactly what i thought
problem with the shifter pushrod cable
|
09-06-2006, 10:25 PM
|
 |
3800 Master
|
|
donnie archer
Location: Amarillo
Join Date: Mar 2006
Posts: 1,611
Forum Experience
donniearcher holds the following arcade championships:
None.
|
|
|
Hey Jon, I think you may have pinched it when you set the motor back in.
|
09-08-2006, 09:24 PM
|
|
3800 Guru
|
|
jon lewis
2k2 camaro
Location: hell, tx
Join Date: Dec 2005
Posts: 568
Forum Experience
ezrollin holds the following arcade championships:
None.
|
|
|
I can move the gear selector lever on the driver's side of the tranny up or down (manually) and it wont get out of 1st!! wth?
|
09-09-2006, 09:21 PM
|
|
3800 Senior Member
|
|
Scott Wendt
01 Jeep Grand Cherokee 4.7
Location: MN
Join Date: Oct 2005
Posts: 240
Forum Experience
FreemenGMTech holds the following arcade championships:
None.
|
|
Quote:
Originally Posted by ezrollin
I can move the gear selector lever on the driver's side of the tranny up or down (manually) and it wont get out of 1st!! wth?
|
let me get this straight...
peas to peas not peas to bacon
you can go under the auto put it in any position PRNDL and you get 1st gear...
even in park&Neutral you get 1st gear?
__________________
----LEGAL SPEAK ----> this is just a theory and is no way intended for a fix, repair, tsb, factory authorized modiciation, or proceedural update! this is just some idiot talking out his butt.
if it an't broke DONT replace it, or suffer issues later [your choice].
-Mr. Goodwrench
[signature broke - never said i is an english major nitpick all you wish]
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -4. The time now is 06:39 AM.
|
WHEN THIS BABY HITS 88MPH - YOUR GONNA SEE SOME SERIOUS SH1T
