|
|
| Quarter Mile Times Just got back from the track? Post your times here. |
 |
|
06-18-2008, 11:56 PM
|
 |
3800 Member
|
|
Beau Creasy
2001 Pontiac Grand Prix GTP
Location: Indiana
Join Date: Jan 2008
Posts: 63
Forum Experience
black.gtp holds the following arcade championships:
None.
|
|
|
Went to the track
I went to Muncie Dragway got 7 passes in. MPH ranged from 109.52 - 109.94 E.t.'s from 13.162 - 13.549 so I got a new P.B. in both (most of the e.t.'s where in the 13.1 area) 60' where from 2.103 - 2.341 I am happy with it it was full weight, car seats and all  dropped tire pressure down a little 30psi still needs a tune and SLICKS 
__________________
http://videos.streetfire.net/video/2...Cam_155357.htm PRJ Tranny W\3.29 ATI 3K stall,PRJ Wires,PRJ Fuel rails,PRJ LL Cam,PRJ Tune, Gen V,ZZP stage 2 I\C core,PRJ FMHE,Meziere I\C Pump,N* T\B,Custom CAI,TOGS Extremes,R\T DP gutted Cat,Autolite 103's,160° T-stat,Lucas 42.5#,and MPS 3.0
|
06-28-2008, 12:14 PM
|
|
3800 Member
|
|
Randy Major
2000 Grand Prix GTP
Location: Birmingham, AL
Join Date: Sep 2004
Posts: 85
Forum Experience
00 GTP Debadged holds the following arcade championships:
None.
|
|
|
Congrats... Now get some slicks and pulls some 12's.
Randy
__________________
S1X Cam/ZZP S3 IC/N*/Gen V/S&S Headers
12.42@110.03 with a 1.74 60 Before IC
12.46@114.3 with a 2.062 60 with IC
|
06-29-2008, 01:08 AM
|
 |
3800 Guru
|
|
steve crabtree
01 gtp
Location: merced
Join Date: Jul 2006
Posts: 552
Forum Experience
01gtprocket holds the following arcade championships:
None.
|
|
|
Beau
COngrats.. try some dot drag raidlas. with slicks you might break something.. are you running the stock ecu?
Randy 1 question i noticed
your 1/4 times
12.42@110.03 with a 1.74 60 Before IC
12.46@114.3 with a 2.062 60 with IC
Why with the inercooler you gained 4 mph and got a slower et? just curious
__________________
Yes i no copper plugs...
Ap104,180 tstat, pulley 3.4-3.7.3.9 - ubend delte..
Full exhaust, Homemade heat shield -removed it.. thorttle body spacer. K&n fiter .
Last edited by 01gtprocket; 06-29-2008 at 01:10 AM.
|
06-29-2008, 01:29 AM
|
|
3800 Member
|
|
Beau Creasy
2001 Pontiac Grand Prix GTP
Location: Indiana
Join Date: Jan 2008
Posts: 63
Forum Experience
black.gtp holds the following arcade championships:
None.
|
|
Quote:
Originally Posted by 01gtprocket
Beau
COngrats.. try some dot drag raidlas. with slicks you might break something.. are you running the stock ecu?
|
I Just bought some slicks  the trans is built I am not worried to much about breaking any thing
when my car was built I had a broke sway bar that was causing false KR so PRJ tuned the car to make it run safe with the mods in sig I am only seeing 13-14 degrees of timing @wot I also have bad tie rod end so I want to get them fixed before I take it back to PRJ for the final tune it has more in it but I am being lazy on getting things fixed
Thanks guys
__________________
http://videos.streetfire.net/video/2...Cam_155357.htm PRJ Tranny W\3.29 ATI 3K stall,PRJ Wires,PRJ Fuel rails,PRJ LL Cam,PRJ Tune, Gen V,ZZP stage 2 I\C core,PRJ FMHE,Meziere I\C Pump,N* T\B,Custom CAI,TOGS Extremes,R\T DP gutted Cat,Autolite 103's,160° T-stat,Lucas 42.5#,and MPS 3.0
|
06-29-2008, 08:23 AM
|
 |
Consistently Inconsistent
|
|
Steve Vega
2dr-97GTP & 4dr-99GTP
Location: Southern California
Join Date: Sep 2007
Posts: 1,368
Forum Experience
Louvered97GTP holds the following arcade championships:
None.
|
|
Quote:
Originally Posted by 01gtprocket
Beau
COngrats.. try some dot drag raidlas. with slicks you might break something.. are you running the stock ecu?
|
I thought it was the other way around. Slicks are safe because they bite and launch you. Drag radials wont byte as hard and can break loose, causing you to overspin and twist/break stuff?
Any guys want to help clarify this one for me?
__________________
99GTP: SLP headers, 9.5:1, Dbl roller, ATI 3250, IS3 cam, IS3 heads & 1.7 rockers, 160-stat, A103's. 65# inj. & custom PCM, 2.25" Intercooler, Gen V, 3.0 MPS, N* TB, LQ4. MPD F.1 hood. HPtuners,Etc.(BROKEN).
97GTP: ZZP Power log & Ported rear, single roller, S1X, ported heads, A104's, 45# inj., 105lb springs, Yella Terra 1.6's, 180-stat, 3.4/3.2 MPS, 99GTP TB, custom PCM. 95 GTP Hood louvers (BROKEN)
Check out my cars.
www.fquick.com/Louvered97GTP
|
06-29-2008, 11:39 AM
|
|
3800 Guru
|
|
steve crabtree
01 gtp
Location: merced
Join Date: Jul 2006
Posts: 552
Forum Experience
01gtprocket holds the following arcade championships:
None.
|
|
|
I thought dot drag raidls were safer than slicks bec they give little./.. Slicks stick to give you traction and then yu break something.\
if yu get some z rated tires might work.. The only way i would try slicks if i was running stock boost. other wise hope yu have some money to fix tranns when it falls apart..
Just my 2 cents..
__________________
Yes i no copper plugs...
Ap104,180 tstat, pulley 3.4-3.7.3.9 - ubend delte..
Full exhaust, Homemade heat shield -removed it.. thorttle body spacer. K&n fiter .
|
06-29-2008, 11:56 AM
|
 |
Premium Paid Subscriber
|
|
Mitchell Crusan
'04 Supercharged MC SS
Location: Midlothian, VA
Join Date: Aug 2005
Posts: 495
Forum Experience
mtcrusan holds the following arcade championships:
|
|
Quote:
Originally Posted by 01gtprocket
Randy 1 question i noticed
your 1/4 times
12.42@110.03 with a 1.74 60 Before IC
12.46@114.3 with a 2.062 60 with IC
Why with the inercooler you gained 4 mph and got a slower et? just curious
|
I think it would be due to the 60 foot time.
__________________
Mitchell
04' Monte Carlo SS
MOD LIST
Intense Standard PCM w/custom tuning, MPD Ram Air Hood w/Airbox, Intense MPS w/3.6", R/T DP with Ubend delete & HF CAT, GMPP Cat Back, LC-1 WB, Jacobs wires, 180 T-stat, & an Optima Red Top
|
06-29-2008, 12:11 PM
|
|
3800 Member
|
|
Beau Creasy
2001 Pontiac Grand Prix GTP
Location: Indiana
Join Date: Jan 2008
Posts: 63
Forum Experience
black.gtp holds the following arcade championships:
None.
|
|
Quote:
Originally Posted by 01gtprocket
if yu get some z rated tires might work.. The only way i would try slicks if i was running stock boost. other wise hope yu have some money to fix tranns when it falls apart..
Just my 2 cents..
|
Well Street tires won't hold my power Also I am making 13# of boost on a 3.0
The only stock part in my car is some of the tune  when I can final get a tune I should be around 350hp @ the wheels
__________________
http://videos.streetfire.net/video/2...Cam_155357.htm PRJ Tranny W\3.29 ATI 3K stall,PRJ Wires,PRJ Fuel rails,PRJ LL Cam,PRJ Tune, Gen V,ZZP stage 2 I\C core,PRJ FMHE,Meziere I\C Pump,N* T\B,Custom CAI,TOGS Extremes,R\T DP gutted Cat,Autolite 103's,160° T-stat,Lucas 42.5#,and MPS 3.0
|
06-29-2008, 03:43 PM
|
|
3800 Member
|
|
Randy Major
2000 Grand Prix GTP
Location: Birmingham, AL
Join Date: Sep 2004
Posts: 85
Forum Experience
00 GTP Debadged holds the following arcade championships:
None.
|
|
|
The times with the IC were at a track that had no traction at all. The 2.0 I pulled was taking off very easy. I couldn't get into the gas until almost half way through 1st gear. I was also running slicks. My trap is good for an 11 second run, but I will have to go to a good track to get it.
Randy
__________________
S1X Cam/ZZP S3 IC/N*/Gen V/S&S Headers
12.42@110.03 with a 1.74 60 Before IC
12.46@114.3 with a 2.062 60 with IC
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -4. The time now is 05:26 AM.
|
