|
|
| Naturally Aspirated No boost under your hood? You can still feel the love here. |
 |
|
07-27-2008, 04:14 PM
|
 |
3800 Newbie
|
|
Rich Sobkowiak
Chevy, Monte Carlo SS, 2003
Location: Michigan
Join Date: Jun 2007
Posts: 9
Forum Experience
03Pace holds the following arcade championships:
None.
|
|
|
Car wont turn over
I changed my rockers yesterday and when I was putting it all back together one of my power wires arced so i didnt think nothing of it but after i get her all back together and go to start it nothing happens, When I turn the key the dash lights go out exept the engine light..
Things that dont work that i know of..
Wont start - turn the key and the dash lights go off except the check engine light and nothing happens ( like the battery is dead )
Headlights dont work
blower fan for heater/ac works untill you turn it to 5 then it dosent work
stereo wont turn on at all
driver side frunt blinker dont work ( passengers side works fine )
__________________
|
07-27-2008, 05:19 PM
|
|
Premium Paid Subscriber
|
|
Harry Stone
1997 Buick Regal GS
Location: Clovis NM
Join Date: Sep 2004
Posts: 2,441
Forum Experience
1Hot97 holds the following arcade championships:
|
|
|
Have you checked the fuses? Sounds like you could have blown several.
__________________
As always, contact Ed Morad for your used parts needs. sales@moradpartscompany.com
I AM NOT ED!!! 
Regal GS(X), 3.5 installed (3.3 hanging around)" MPS pulley, SLP headers; cat back; CAI, Intense upper engine mounts; 3rd gen LSD; S1X cam; HPTuner, 1.6 Roller rockers, ported S/C, Autolite 104's, 180 t-stat, headlight wiring upgrade, HIR low beams, SLP springs, GM sway bars and trailing arms, fancy-ass rims and cool badges. 
|
07-27-2008, 05:49 PM
|
|
3800 Newbie
|
|
Rich Sobkowiak
Chevy, Monte Carlo SS, 2003
Location: Michigan
Join Date: Jun 2007
Posts: 9
Forum Experience
03Pace holds the following arcade championships:
None.
|
|
|
got it turning over but it wont start i must have unpluged the main connector in there just enough to cause it to not get a connection..
I replaced all the rockers with stock modified, is there anything im forgetting that would cause it to not start up
__________________
|
07-27-2008, 06:42 PM
|
|
Premium Paid Subscriber
|
|
Harry Stone
1997 Buick Regal GS
Location: Clovis NM
Join Date: Sep 2004
Posts: 2,441
Forum Experience
1Hot97 holds the following arcade championships:
|
|
|
Fuel pump, Ignition control module, crank and cam position sensor wires, vacuum lines, MAP sensor connector.......
__________________
As always, contact Ed Morad for your used parts needs. sales@moradpartscompany.com
I AM NOT ED!!!
Regal GS(X), 3.5 installed (3.3 hanging around)" MPS pulley, SLP headers; cat back; CAI, Intense upper engine mounts; 3rd gen LSD; S1X cam; HPTuner, 1.6 Roller rockers, ported S/C, Autolite 104's, 180 t-stat, headlight wiring upgrade, HIR low beams, SLP springs, GM sway bars and trailing arms, fancy-ass rims and cool badges.
|
07-27-2008, 09:37 PM
|
|
3800 Newbie
|
|
Rich Sobkowiak
Chevy, Monte Carlo SS, 2003
Location: Michigan
Join Date: Jun 2007
Posts: 9
Forum Experience
03Pace holds the following arcade championships:
None.
|
|
|
I did a compresion test and I have no compresion.. I thought that I did everything right, took the old rockers off put the new ones in torqueing them down to 11ft lb + 90.
Did I not do it right.. I might just take them out and put the old ones back in tomarow, im already going to miss work tonight.
__________________
|
07-27-2008, 10:29 PM
|
|
Premium Paid Subscriber
|
|
Harry Stone
1997 Buick Regal GS
Location: Clovis NM
Join Date: Sep 2004
Posts: 2,441
Forum Experience
1Hot97 holds the following arcade championships:
|
|
|
Can you pull the valve cover and post a picture? Did you put the pedestals back on?
__________________
As always, contact Ed Morad for your used parts needs. sales@moradpartscompany.com
I AM NOT ED!!!
Regal GS(X), 3.5 installed (3.3 hanging around)" MPS pulley, SLP headers; cat back; CAI, Intense upper engine mounts; 3rd gen LSD; S1X cam; HPTuner, 1.6 Roller rockers, ported S/C, Autolite 104's, 180 t-stat, headlight wiring upgrade, HIR low beams, SLP springs, GM sway bars and trailing arms, fancy-ass rims and cool badges.
|
07-27-2008, 10:35 PM
|
|
3800 Newbie
|
|
Rich Sobkowiak
Chevy, Monte Carlo SS, 2003
Location: Michigan
Join Date: Jun 2007
Posts: 9
Forum Experience
03Pace holds the following arcade championships:
None.
|
|
|
I reused the stock bolt i think thats what my problem is
__________________
|
07-27-2008, 11:10 PM
|
|
Premium Paid Subscriber
|
|
Harry Stone
1997 Buick Regal GS
Location: Clovis NM
Join Date: Sep 2004
Posts: 2,441
Forum Experience
1Hot97 holds the following arcade championships:
|
|
|
Unless they break, that won't do what your problem is.
__________________
As always, contact Ed Morad for your used parts needs. sales@moradpartscompany.com
I AM NOT ED!!!
Regal GS(X), 3.5 installed (3.3 hanging around)" MPS pulley, SLP headers; cat back; CAI, Intense upper engine mounts; 3rd gen LSD; S1X cam; HPTuner, 1.6 Roller rockers, ported S/C, Autolite 104's, 180 t-stat, headlight wiring upgrade, HIR low beams, SLP springs, GM sway bars and trailing arms, fancy-ass rims and cool badges.
|
07-27-2008, 11:22 PM
|
|
3800 Newbie
|
|
Rich Sobkowiak
Chevy, Monte Carlo SS, 2003
Location: Michigan
Join Date: Jun 2007
Posts: 9
Forum Experience
03Pace holds the following arcade championships:
None.
|
|
|
I ordered some reuseable ones anyway, Ive taken the damn thing apart and put it all back together 4 times now.
__________________
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -4. The time now is 04:33 PM.
|
