L26 UIM onto L36

[01goldgt]

I have an L26 upper intake manifold and L67 throttle body w/the adapter. Is there anything else that would be needed to make this work on my L36?

[fever42]

Works great , you will need a late model lim for egr pipe to fit
also a lot of custom work if you have a HVIII. Just about ready to install
maybe over the 4th. No other problems i can see. My uim just came back from a high polish job. Also have to match my new lim to my gasket as my heads are already gasket matched.

[BillBoost37]

You should be changing the maf table in your pcm to match that of the TB you are using. Other than that, it should be a pretty direct bolt up.