|
|
| Dyno Results Post your dyno results here. |
 |
07-25-2007, 02:33 PM
|
 |
Sponsoring Vendor
|
|
Brian Turner
1988 Mustang Twin Turbo
Location: Columbus Ohio
Join Date: May 2005
Posts: 1,474
Forum Experience
Dyno Brian holds the following arcade championships:
None.
|
|
|
Post your Dyno results here.
Hello all.
As you have seen in this forum section, we like to post all of our dyno results. I imagine some of you have had your car on a l dyno at one time or another. What kind of numbers did you see? Were they able to give you boost and air/fuel readings? How about either a link or a pic of your graph.
__________________
|
07-25-2007, 05:24 PM
|
|
3800 Member
|
|
Nickolus Tompkins
2006 Cobalt SS/SC
Location: Grafton, Ohio
Join Date: Nov 2006
Posts: 34
Forum Experience
SSweet06 holds the following arcade championships:
None.
|
|
Brian,
I'm sure this doesn't help much since I got my car tuned and dynoed on your dyno but I figured I would at least post just incase it helps you out. I put down 261.5hp and 243.4tq with Intense Stage 4, Magnaflow cat-back, Injen CAI, and 94 Octane. Here's a link to the chart.
http://cobaltss.net/forums/showthread.php?t=32110
Hope this helps.
__________________
2006 Cobalt SS/SC Intense Stage 4 - 261.5hp and 243.4tq, Injen CAI, Magnaflow Cat-back, Aeroforce Scan Gauge, CA Strut Brace. B&M STS, Spec Stage 3+ clutch and flywheel, Intense DP, waiting on header 
13.93@106.10
|
07-25-2007, 10:18 PM
|
|
3800 Senior Member
|
|
Shawn Bucklad
Location: Gahanna, OH
Join Date: Sep 2004
Posts: 203
Forum Experience
Buck531 holds the following arcade championships:
None.
|
|
|
__________________
'99 Regal GS.
Mods? yes I have some.
Last edited by Dyno Brian; 07-26-2007 at 12:10 PM.
|
07-26-2007, 01:24 AM
|
|
Sponsoring Vendor
|
|
Brian Turner
1988 Mustang Twin Turbo
Location: Columbus Ohio
Join Date: May 2005
Posts: 1,474
Forum Experience
Dyno Brian holds the following arcade championships:
None.
|
|
Quote:
Originally Posted by Buck531
Hey Brian. Any way I could get you to scan my last graph? it was on 5/6/07. My scanner is scanning two THICK lines on it  . If you don't want to post it here just email me @ buck531@wowway.com or just post it here.. it doesn't matter to me.
Thanks. |
Not a problem. Send me a PM so I remember to get you a JPEG of it.
I sometimes forget things after spending all day at work and all night at the dyno.
__________________
|
07-26-2007, 04:30 PM
|
 |
3800 Senior Member
|
|
Greg Was
2001 GTX & 1998 GTP (Race car)
Location: Lordstown, Oh
Join Date: Sep 2004
Posts: 257
Forum Experience
radrace19 holds the following arcade championships:
None.
|
|
XPZ Cam, ZZP S4 heads, L36 bottom end, Gen V, Non-intercooled  , 2.8 pulley
BAD PCM
Same setup new PCM!
Edit: Wrong graph 
-Greg
__________________
2001 Supercharged GTX - Stock
1998 GTP - 393?? FWHP
ZZP S4 Heads & XPZ Cam
11.750@114.27 W/1.704 60' Non Intercooled
Intense S3 Heads & Stage 3 cam
11.245 @ 122.28 w/1.658 60'
Last edited by radrace19; 07-26-2007 at 04:35 PM.
|
07-26-2007, 07:26 PM
|
|
3800 Senior Member
|
|
Shawn Bucklad
Location: Gahanna, OH
Join Date: Sep 2004
Posts: 203
Forum Experience
Buck531 holds the following arcade championships:
None.
|
|
|
Thanks Brian. I think the one printout I got was actual HP. I was wondering why there was 4 more hp in there.
__________________
'99 Regal GS.
Mods? yes I have some.
|
07-30-2007, 03:27 PM
|
 |
3800 Senior Member
|
|
robert johnson
white 98 gtp 4 door
Location: columbus ohio
Join Date: Nov 2005
Posts: 470
Forum Experience
zacknhs holds the following arcade championships:
|
|
here is my dyno tune from last october scott is amazing with these cars. the sad thing is i ended up buying my gen V less than a month after this. so i bought hptunners to do my own tuning i just need to get it on the dyno. and now my intercooler is going on by the end of the week so it's prolly dyno time here soon.
__________________
Mods: gen 5, stage 2 IC, ls1 tb, LQ4 MAF, 3" mps, 42.5 injectors, intense custom tune, hptuners, slp headers and exhaust, 1.9 rr,4" FWI,....
Big dent from stupid woman driver
No spoiler cuz i hate the original and am to poor for a new one.
1978 Kawasaki KZ1000
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -4. The time now is 08:17 AM.
|
