Thread: Camshaft Specification Repository
View Single Post
  #2 (permalink)  
Old 09-22-2005, 12:53 PM
BumpinGTP BumpinGTP is offline
3800 Guru
Points: 5,400, Level: 47 Points: 5,400, Level: 47 Points: 5,400, Level: 47
Activity: 0% Activity: 0% Activity: 0%
 
Information not available to guests.
Join Date: Sep 2004
Posts: 713
Forum Experience
Points: 5,400, Level: 47 Points: 5,400, Level: 47 Points: 5,400, Level: 47
Activity: 0% Activity: 0% Activity: 0%
BumpinGTP is on a distinguished road
Send a message via AIM to BumpinGTP Send a message via Yahoo to BumpinGTP
BumpinGTP holds the following arcade championships:
None.
Stattama SS4
Duration @ .050" is 218/230. Lift is .528/.544 with 1.6 rockers. Lobe separation is 116 degrees.

Stattama ST1
Duration @ .050" is 206/206. Lift is .512/.512 with 1.6 rockers. Lobe separation is 111 degrees.

Stattama ST2
Duration @ .050" is 212/212. Lift is .520/.520 with 1.6 rockers. Lobe separation is 112 degrees.

Stattama ST3
Duration @ .050" is 218/212. Lift is .528/.520 with 1.6 rockers. Lobe separation is 113 degrees.

Stattama ST4
Duration @ .050" is 224/218. Lift is .536/.528 with 1.6 rockers. Lobe separation is 116 degrees.
Reply With Quote